PART C - WATERFRONT FACILITIES
Multileg mooring systems.
Single point mooring systems (mono buoy).
Jetties: Jetties are used when the water depth or the shore line is unsuitable for bringing in tankers.
Docks and piers: Docks or piers are the most secure for unloading tankers. Security is easier to
maintain. Access to the tanker is easier in case of emergency and for maintenance. They are protected
from winds and tide and should be separated from other classes of supply. The depth should be at least
ten feet of water under the biggest tanker you expect to receive fully loaded at mean low tide (Figure 8-
Cable and Switch
Hoses to Shoreline
Figure 8-1. Layout of marine dock facilities for tanker unloading.
PART D - EQUIPMENT REQUIREMENTS
Storage tanks. Minimum of two tanks for each product and ballast water.
Oily water separator for treatment of ballast water.
Fire fighting equipment. Portable fire extinguishers and an engineer fire fighting detachment.
Pollution control equipment. Skimmer boats, sorbent materials, and containment booms.
Communications. Communications have to be from the dock to the ship and to the tank farm.
Transportation. Ground transportation and workboats for transporting men and equipment to the tanker.
Grounding system. For bonding the ship to the dock. If the dock has a cathodic protection system it
should be turned off before the transfer of fuel begins.
Base laboratory. A lab should be available for testing the products.
PART E - PREPARATION FOR ARRIVAL
The tanker arrival schedule is checked to ensure the type and quantity of product is known. Personnel are
required to meet the tanker and go aboard in the harbor. A terminal representative, lab technician, and