LESSON 2
PRACTICE EXERCISE
ANSWER KEY AND FEEDBACK
Item
Correct Answer and Feedback
1.
A.
10 percent (a 1-foot rise in a 10-foot distance).
The collapsible fabric water tank may be installed on a
slope of up to 10 percent (a 1-foot rise in a 10-foot
distance). The tank base should not rest over abrupt drop-
off greater than 4 inches.
(page 2-2, para 1)
2.
A.
DA Pamphlet 738-750.
When unpacking the tank, have your soldiers inspect for
damage incurred during movement.
They should check the
equipment against the packing slip to see if the shipment
is complete.
Have them report all discrepancies in
accordance with the instructions in DA Pamphlet 738-750.
Also have them check to see whether the equipment has been
modified. (page 2-2, para 2)
3.
A.
0.5.
By operating the foot bellows, they can inflate the collar
until it is firm but not overinflated, as the collar may be
damaged if overinflated (maximum air pressure is 0.5 psi).
(page 2-3, para 2d)
4.
B.
3,000.
If a metering gauge is not available, the tank is full when
the water level reaches the lower edge of the tank collar.
A maximum of 3,000 gallons of water may be put into the
tank. (page 2-3, para 2e)
5.
A.
Float side down.
While the tank is being filled, have the cover (float side
down) placed into position on top of the tank. (page 2-4,
para 2f)
QM4912
2-16
Previous Page
