Home
Download PDF
Order CD-ROM
Order in Print
Home
>
Quartermaster Documents and Training Manuals
>
> Direct Class III Operations
Lesson 1: Supervise the Selection and Prepare a Class III Site
Part A: Preparation for Movement
Part C: Selection Of Class III Supply Point
Figure 1-1 Site selection guidelines for a Class III supply point.
Lesson 1. Practice Exercise - QM50950011
Lesson 2: Supervise the Movement of a Fuel System Supply Point (FSSP)
Part A: Planning the Movement of the FSSP
Figure 2-1. FORSCOM Form 285-R (Vehicle Load Card)
Figure 2-2. DA Form 5748-R (Shipment Unit Packing List and Load Diagram).
Part B: Selecting the Site for Class III Supply Point and FSSP Operation.
Figure 2-3. Typical FSSP arrangements.
Figure 2-4. Typical layout of the FSSP.
Table 2-1. Components of the FSSP
Part C: Supervising the Movement of the FSSP
Part D: Environmental Considerations
Lesson 2. Practice Exercise.
Lesson 3: Supervise the Operation of the FSSP
Part A: Supervising the Operation of the FSSP
FSSP Operations
The 5-Gallon Can Filling Operations.
Part B: Defense Plan
Part C: Environmental Considerations
Figure 3-2. Type I repair kit.
Figure 3-3, Type II repair kit.
Figure 3-4. Repairing a collapsible tank using plugs.
Lesson 3. Practice Exercise - QM50950034
Lesson 4: Direct Assault Hoseline Operations
Part A: The Assault Hoseline System
Figure 4-1, Laying the assault hoseline on a road.
Part D: Supervising the Evacuation and Displacement of the Assault Hoseline
Lesson 4. Practice Exercise - QM50950039
Lesson 5: Direct the Assembly, Operation, PMCS, and Disassembly
Part A: FARE Components
Part C: Quality Surveillance
Part D: Maintaining Communications
Part F : Safety
Part G : Environmental Considerations
Lesson 5. Practice Exercise - QM50950047
Practice Exercise Solutions - QM50950048
Section I Glossary
Section II: Terms - QM50950050
Direct Class III Operations