Supervise Operations of the 600-GPH ROWPU

Supervise 600
Page Navigation
8

LESSON 2

101-540-2015

101-540-2030

101-540-2031

OVERVIEW

This lesson discusses supervising the operation of the 600-GPH ROWPU. You

will learn PMCS, startup, operation, and shutdown of the generator.

You

also will learn startup, operation, shutdown, backwash, and reverse osmosis

element cleaning of the 600-GPH ROWPU.

TERMINAL LEARNING OBJECTIVE:

ACTION:

You will supervise the operation of the 600-GPH ROWPU, the

operation and PMCS of the 30-kilowatt diesel generator, and

the completion of water reports/logs/forms.

CONDITION:

You will be given information from TM 5-6115-465-12 and TM

10-4610-240-10.

STANDARD:

You will supervise 600-GPH ROWPU operations, ensuring that

sufficient quantities of potable water are produced and

that the quality of water meets the standards set by the

Office of the Surgeon General.

REFERENCES:

The material contained in this lesson was derived from the

following publications: FM 10-52-1, TM 10-4610-239-10, TM

5-6115-465-12, STP 10-77W24-SM-TG, and TB MED 577.

INTRODUCTION

The team chief of the 600-GPM ROWPU must be able to supervise the operators

according to doctrine. The team chief is the expert operator and must be

able to recognize proper procedures of startup, operation, shutdown,

backwash, R.O. element cleaning, and dismantle at a glance. The mission of

providing potable water in quantity and quality is your responsibility.

2-1

QM4913

Index